Cosmo Appliances

Fuel Your Culinary Passion

  • 0

    • Support Hub

    COS-FDR225RHSS Electrical Installation Troubleshooting – 120V

    No power or low power. Check that the unit is plugged in and the breaker is switched to ON. Turn the breaker to the OFF position and wait 5 minutes. Turn the breaker back to the ON position and attempt to use the unit again. Check that the voltage is correct for your unit according to the installation manual – 110/120V, 60Hz, and 15 to 20 Amps. We advise that electrical installation be performed by a qualified, licensed electrician. If installation was not performed by a licensed professional, contact one as soon as possible to verify that the power is adequate for your unit and has been safely connected.

    Read More

    COS-FDR225RHSS FAQ

    Q: Why is my refrigerator buzzing? A: The compressor in your Cosmo refrigerator may produce buzzing noises during operation, particularly when it starts or stops cooling. This is normal operation and not a cause for concern as long as your refrigerator is still cooling properly. Q: Where can I find the model and serial number of my unit? A: The model and serial numbers can be found in one of two places: on the rear of the refrigerator, or on the refrigerator’s box. We recommend writing this information down so you have it for easy reference. Q: What do the error codes mean on my refrigerator?  A: The error codes on your refrigerator are: Error Code Error Description E1 The refrigerator’s temperature sensor has failed. E2 The freezer’s temperature sensor has failed. E5 The freezer’s defrost sensor has encountered an error. E6 Communication error. E7 The ambient temperature sensor has encountered an error. EH The humidity sensor has encountered an error. E0 The ice maker has encountered an error. Q: How do I open the refrigerator if there are no handles? A: The Cosmo french door refrigerator has hidden handles below each door to assist with opening the refrigerator.  Q: What are the dimensions of the Cosmo French door refrigerator? A: The dimensions of the refrigerator are: 35.8” W x 29” D x 70” H. The doors open at an angle of up to 135 degrees, bringing the depth to 39.1”. With the doors fully open, the width including the doors is 62.7”. Q: Is the Cosmo French door refrigerator Energy Star rated? A: Yes, the Cosmo refrigerator is Energy Star certified. 

    Read More

    COS-3019ORM1SS FAQ

    Q: How do I set the time of day on my microwave? A: To set the clock on your microwave:  Press CLOCK. Press the number keys to enter the current time. Press CLOCK again to confirm the setting. Q: What is my unit’s CFM? A: The maximum CFM for your over-the-range hood is 300.  Q: How do I convert my unit to ductless? A: To convert your unit to a ductless operation and recirculate the air back into the room: Purchase and install the necessary carbon filter kit found online at www.cosmoappliances.com/product-category/parts-and-accessories/range-hood-parts/filters/. This filter is not included with your purchase and must be purchased separately. Q: Where can I find the model and serial number of my unit? A: The model and serial numbers can be found in one of two places: on the rear of the microwave, or on the microwave’s box. We recommend writing this information down so you have it for easy reference.

    Read More